How do I install Fingerprint readers for PlusPoint?

How do I install Fingerprint readers for PlusPoint?

Please Note
PlusPoint ONLY supports Digital Persona Fingerprint Devices.

Each workstation that is going to use a Fingerprint reader needs a driver to be installed for the device to work.

1. Employee Codes

  1. Once you have installed the drivers navigate to Administration -> General Administration -> Employee Codes.
  1. Select the Employee  which fingerprint you would like to register, click on "Change" and activate the Fingerprint access setting.
  1. The system will request that the Employee scans their fingerprint 4 times.
  1. Once the system accepted the scans it will display a success message.
  1. Once done, click on the ‘"Save" button.
  1. Each workstation that has the Fingerprint Reader installed also needs to be configured, navigate to Administration -> Point of Sale Administration -> Workstations.
  1. Select the workstation where the Fingerprint reader is installed from the list displayed on the left, click on "Change" and go to the  Device Control Tab and activate the "Finger Print Reader Installed" setting under "Other Installed Modules", then click on "Save".

    • Related Articles

    • What is PlusPoint Auto Upgrade?

      1. Introduction PlusPoint Users will now have the ability to upgrade PlusPoint by themselves. Users that have access will be able to use the "Check for updates" feature in the support menu. Internet access is required. This feature connects to a ...

    • What is PlusPoint Hyperspace?

      A facility was added to move clients to a future date without having to run multiple End of Days and Month Ends to get there. This is only available in PlusPoint version 1.95 revision 0511 and above. Only HTI will have access to this newly added ...

    • How do I reopen a closed invoice on the Point of Sale?

      In order to reopen a closed invoice on PlusPoint please follow the below steps:  1. Control Menu Please note you will require Supervisor rights to complete this action. Open PlusPoint and select "Show Closed" at the top of the page. Select the ...

    • My PlusPoint system date is behind how do I catch up to the correct date?

      Should it happen that the PlusPoint system date is behind the below steps need to be followed in order to run multiple End of Days:  1. End of Day Lockout Access PlusCentral and navigate to Administration -> General Administration -> System ...

    • How do I fix an "Invoice in use" message on PlusPoint when no one is working on the invoice?

      Should it happen that PlusPoint keeps showing the "Invoice in Use" message although no one is working on the invoice and a shift needs to be closed the below steps need to be followed:  1. System Lockout In order to release this invoice a POS lockout ...