How do I setup a Wireless Portable Router to connect a printer to the network?

How do I setup a Wireless Portable Router to connect a printer to the network?

In order to install the Wireless router the below steps must be followed:

1. TP Link TL-MR3020 Wireless Router Setup

1. Switch the operation mode to AP and connect the hardware according to the diagram above.

1. Connect you device to the router wirelessly or via an Ethernet cable. The SSID (wireless network name) and password are on the routers label.

1. Enter the URL (http://tplinkwifi.net/) in a web browser and create a password for future logins.

1. Select your Time Zone and click "Next".

1. Select Repeater/Bridge Mode and click "Next".

1. Click "Scan" to find the network you want to extend. Enter the Password for the selected wireless network if it is encrypted.

1. Either customise your Network Name (SSID) and Password or keep the default ones, and then click "Next".

1. Click "Save" to apply configuration.

1. Relocate the router about halfway between your host router and the Wi-Fi dead zone.